MODEL: JP-400
DIMENSIONS :

160 x 65 x 180

(LxWxH) cm

WEIGHT :

110 kg

SPECIFICATIONS :
PACKAGE: DIP
LEADS : 8-40 PINS
BODY WIDTH: 300-600 MILS
TUBE LENGTH : 480 – 680 mm
MATCHINE INPUT : 25 TUBE
AUTO UNLOAD : 25 TUBE
MANUAL OUTPUT : 4 TUBE
CONTACT METHOD : CONTACT PIN
INTERFACE SIGNAL: START,EOT,BIN1-8
INTERFACE CONNECTOR: 25 PIN CONNECTOR
SPEED : 4400 PC/HOUR
POWER : AC 110 /220 V
AIR SOURCE: 4 - 6 kg/cm2
FEATURE :
  •  
  • Auto loader and unloader.
  • It is easy to operate from the “INTELLIGENT OPERATE PANEL”.
  • There are 5 function keys can be set from the “INTELLIGENT OPERATE PANEL ”, including AUTO-OPERATION, CHINESE/ENGLISH CHOICE, MANUAL, SET-UP PARAMETER/VALUE, IC OUTPUT.
  • Trouble shooting is easy from the monitor which can show it, and the monitor has detail description to repair it.
  • There are eight bins which can be set.
  • Test bin number and double test can be set from the “SET-UP PARAMETER”.
  • Each output track also can be set bin number and counter from the “SET-UP VALUE”.
  • The amount of each bin number and total can be shown by monitor.
  • The track is opened in order to take off the bad products which can not move on track.
  • The pulse of interface can change low or height from switch and its time delay can adjust.
  • The kits is changeable.

 

Back